PBE-5AC-400-ISO Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-400-ISO/PBE-5AC-400-ISO_EN.html[9/30/2019 3:34:09 PM]
Ethernet
Reset Button
Release Button
This Gigabit Ethernet port is used to connect the power and should be connected to the
LAN and DHCP server.
To reset to factory defaults, press and hold the Reset button for more than 10 seconds
while the device is powered on. Alternatively, the device may be reset remotely via a Reset
button located on the bottom of the Gigabit PoE Adapter.
After you assemble the PowerBeam, check the Release button; it should be fully engaged
in the Release Button Slot of the Rear Housing. This ensures that the Antenna Feed is
locked into place. If you need to remove the Antenna Feed, you must depress the Release
button first.
LEDs
