Release Button
After you assemble the PowerBeam, check
the
Release
button; it should be fully engaged in the
Release
Button Slot
of the
Rear Housing
. This ensures that the
Antenna
Feed
is locked into place. If you need to remove the
Antenna
Feed
, you must depress the
Release
button first.
LEDs
Signal
The default values are shown below:
LED will light blue when the wireless signal
strength is equal to or above -65 dBm.
LED will light blue when the wireless signal
strength is equal to or above -73 dBm.
LED will light blue when the wireless signal
strength is equal to or above -80 dBm.
LED will light blue when the wireless signal
strength is equal to or above -94 dBm.
Ethernet
The Ethernet LED will light steady blue
when an active Ethernet connection is made and
flash when there is activity.
Power
The Power LED will light blue when the
device is connected to a power source.
