Accessing the Configuration Interface
The EdgeSwitch is set to
DHCP
by default, so it will try to
automatically obtain an IP address. If that fails, then it will use
the default fallback IP address,
192.168.1.2
. Proceed to the
appropriate section,
DHCP
or
Fallback IP Address
:
DHCP
Use one of the following methods:
• Set up the DHCP server to provide a specific IP address to
the EdgeSwitch based on its MAC address (on the label).
• Let the EdgeSwitch obtain an IP address and then check the
DHCP server to see which IP address was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address
in the address field. Press enter (PC) or return (Mac).
2. The login screen will appear. Enter ubnt in the
Username
and
Password
fields. Read the Ubiquiti License Agreement,
and check the box next to
I agree to the terms of this License
Agreement
to accept it. Click Login.
The EdgeSwitch Configuration Interface will appear. Customize
additional settings as needed. For more information on PoE
configuration, refer to the
Configuring PoE Settings
section.
