Front Panel Button
Reset
Button
Description
Reset
There are two methods to reset the
EdgeRouter to factory defaults:
• Runtime reset (recommended) The
EdgeRouter should be running after
bootup is complete. Press and hold the
Reset button for about 10 seconds until
the LED for port eth3 starts flashing and
then becomes solidly lit. After a few
seconds, the LED will turn off, and the
EdgeRouter will automatically reboot.
• Power-on reset Disconnect the Power
Cord. Press and hold the Reset button
while connecting the power (refer to
“Connecting Power” for details). The
port LEDs will light up in sequential order.
Keep holding the Reset button until the
System LED starts flashing blue and white,
and then release the button.
