18.02.2020
ES-10XP Qu ck Start Gu de
https://dl.ubnt.com/qsg/ES-10XP/ES-10XP_EN.html
3/15
RJ45 PoE LED (Ports 1 - 8)
RJ45 Speed/L nk/Act v ty LED (Ports 1 - 8)
SFP L nk/Act v ty LED (Ports 9 - 10)
RJ45 (Ports 1 - 8)
SFP (Ports 9 - 10)
Reset Button
Power
Off
No Power over Ethernet
Green
24V Power over Ethernet
Off
No L nk
Amber
L nk Establ shed at 10/100 Mbps
Flash ng Ind cates Act v ty
Green
L nk Establ shed at 1000 Mbps
Flash ng Ind cates Act v ty
Off
No L nk
Green
L nk Establ shed at 1 Gbps
Flash ng Ind cates Act v ty
RJ45 ports support 10/100/1000 Ethernet connect ons and 24V Pass ve Power over
Ethernet (PoE) output.
Hot-swappable SFP ports support 1 Gbps connect ons. If you use a copper Ethernet
module (example: UF-RJ45-1G), power off the EdgeSw tch before nsert on;
otherw se there may be a dev ce reboot.
To reset to factory defaults:
1. D sconnect power from the EdgeSw tch.
2. Reconnect power wh le hold ng the Reset button. The port LEDs w ll l ght up n
sequent al order (th s takes approx mately f ve seconds).
3. When the port 1 LED ashes aga n, release the Reset button.
Connect the ncluded Power Adapter to the Power port.
ES-10XP Qu ck Start Gu de
