Ubiquiti EdgeRouter LITE, Quick Start Manual, Page: 4 / 20

Interface Description
Reset
There are two methods to reset the
EdgeRouter Lite to factory defaults:
• Runtime reset (recommended) The
EdgeRouter Lite should be running after
bootup is complete. Press and hold the
Reset button for about 10 seconds until
the right LED on port eth2 starts flashing
and then becomes solidly lit. After a
few seconds, the LED will turn off, and
the EdgeRouter Lite will automatically
reboot.
• Power-on reset Disconnect the Power
Cord from the Power Adapter. Press and
hold the Reset button while connecting
the Power Cord to the Power Adapter.
Keep holding the button until the right
LED on port eth2 starts flashing and then
stops flashing after a few seconds.