background image

11

General Warranty

warranties, express or implied, including the implied warranties 
of merchantability and fitness for a particular purpose and any 
warranties arising from a course of dealing, usage or trade practice 
with respect to the products. Repair or replacement in the manner 
provided herein shall be the sole and exclusive remedy of Buyer 
for breach of warranty and shall constitute fulfillment of all 
liabilities of UBIQUITI NETWORKS with respect to the quality and 
performance of the Products. UBIQUITI NETWORKS reserves the 
right to inspect all defective Products (which must be returned by 
Buyer to UBIQUITI NETWORKS factory freight prepaid).
No Products will be accepted for replacement or repair without 
obtaining a Return Materials Authorization (RMA) number from 
UBIQUITI NETWORKS. Products returned without an RMA number 
will not be processed and will be returned to Buyer freight collect. 
UBIQUITI NETWORKS shall have no obligation to make repairs 
or replacement necessitated by catastrophe, fault, negligence, 
misuse, abuse, or accident by Buyer, Buyer’s customers or any 
other parties. The warranty period of any repaired or replaced. 
Product shall not extend beyond its original term.

Warranty Conditions

The foregoing warranty shall apply only if:
(I)  The Product has not been subjected to misuse, neglect or unusual 

physical, electrical or electromagnetic stress, or some other type 
of accident.

(II)  No modification, alteration or addition has been made to 

the Product by persons other than UBIQUITI NETWORKS 
or UBIQUITI NETWORK’S authorized representatives or 
otherwise approved by UBIQUITI NETWORKS.

(III)  The Product has been properly installed and used at all times 

in accordance, and in all material respects, with the applicable 
Product documentation.

(IV)  All Ethernet cabling runs use CAT5 (or above) shielded cabling.
Disclaimer: UBIQUITI NETWORKS does not warrant that the 
operation of the products is error-free or that operation will 
be uninterrupted. In no event shall UBIQUITI NETWORKS be 
responsible for damages or claims of any nature or description 
relating to system performance, including coverage, buyer’s 

Summary of Contents for Bullet M BM2-Ti





















Reviews: