6
airVision
™
NVR Quick Start Guide
3. Connect the Power Cord to the Power Adapter. Connect the
other end of the Power Cord to a power outlet.
Accessing the airVision Configuration Portal
The airVision Configuration Portal is accessed by using a web
browser. There are three different ways to access the portal:
•
airVision Online Registration
The simplest method for airVision
NVRs connected to a DHCP-enabled LAN with Internet access.
•
Ubiquiti Device Discovery Tool
For users with a DHCP-enabled
LAN that do not wish to register or do not have Internet access.
•
Direct Connection to airVision NVR
Allows you to configure
the airVision NVR by connecting it directly to your computer via
Ethernet.
airVision Online Registration
Note:
The
airVision
NVR must be connected to a
DHCP-enabled LAN that has Internet access.
1. Press the Power button on the airVision NVR, and wait about
one minute for it to fully boot up and start all services.
2. Launch a web browser from a computer connected to the
same LAN. Type http://www.ubnt.com/airvision/register in
the address field. Press enter (PC) or return (Mac).
