8. On the front of the
Dish
, connect the
Feed
to the
Radio
and
Dish
using the four
M4x12 Screw and Washer Assemblies
.
Note:
DO NOT handle the assembled unit by the feed
at any time, especially during installation of the
Dish
to the pole. Always hold the
Dish
or the brackets
while installing the product.
9. Attach the
Stabilizer Brackets
to the pole just beneath the
area where the
Dish
will be attached. Use two
M10x100
Bolts
, two
M10 Washers
, two
M10 Spring Lock Washers
,
and two
M10 Hex Nuts
. Tighten the nuts to approximately
50 N-m (37 lb-ft).
Note:
The mounting assembly can accommodate a
Ø 1.5" - 4.0" pole.
