Ubiquiti airMAX NanoStationM2, Quick Start Manual

Page: 5 / 20

3
Hardware Overview
LEDs
LAN2 LAN1
Power The Power LED will light green when the
device is connected to a power source.
LAN1 WAN/Main Ethernet The LAN1 Ethernet LED
will light steady green when an active Ethernet
connection is made to the
Primary Ethernet Port and
flash when there is activity.
LAN2 LAN/Secondary Ethernet (NanoStation M2/M3/M5
RQO\©7KH© LAN2 Ethernet LED will light steady green
when an active Ethernet connection is made to
the
Secondary Ethernet Port and flash when there
LVDFWLYLW\
Signal In airOS, you can modify the wireless signal
strength threshold values for each LED on the
Advanced tab under Signal LED Thresholds . The
default values are shown below:
LED will light red when the wireless signal
strength is above -94 dBm.
LED will light amber when the wireless signal
strength is above -80 dBm.
LED will light green when the wireless signal
strength is above -73 dBm.
LED will light green when the wireless signal
strength is above -65 dBm.