26
Chapter 6: Network Tab
airFiber
®
AF5/AF5U User Guide
Ubiquiti Networks, Inc.
Chapter 6: Network Tab
The
Network
tab allows you to configure settings for the
management network.
There are two ways to access the airFiber Configuration
Interface:
•
Management Port
Enabled by default. Use a direct
connection to the
Management
port for out-of-band
management.
•
In-Band Management
Enabled by default. In-band
management is available through the local
Data
port or
the
Data
port at the other end of the link.
The
Management
port and in-band management share
the default IP address of
192.168.1.20
.
Change
To save or test your changes, click
Change
.
A new message appears. You have three options:
•
Apply
To immediately save your changes, click
Apply
.
•
Test
To try the changes without saving them, click
Test
.
To keep the changes, click
Apply
. If you do not click
Apply
within 180 seconds (the countdown is displayed),
the airFiber AF-5 times out and resumes its earlier
configuration.
•
Discard
To cancel your changes, click
Discard
.
Management Network Settings
In-Band Management
Enabled by default. In-band
management is available through the local
Data
port or
the
Data
port at the other end of the link.
Note:
If
In-Band Management
is enabled, ensure that
each airFiber radio of a link has a unique
IP Address
. If
the airFiber radios use the same
IP Address
, then you
may lose access via the
Data
ports.
Management IP Address
The airFiber AF-5 can use a
static IP address or obtain an IP address from its DHCP
server.
•
DHCP
Keep the default,
DHCP
, to use DHCP reservation
on your router to assign a unique
IP Address
. The local
DHCP server assigns a reserved IP address, gateway IP
address, and DNS address to the airFiber AF-5.
Note:
If you select the
DHCP
option, ensure that
you use DHCP reservation because if you do not
know the IP address, then the only way to manage
the airFiber AF-5 is to reset the airFiber AF-5 to its
factory default settings. (Press and hold the
Reset
button for more than five seconds.) Its default
Management IP Address
is reset to
192.168.1.20
.
-
DHCP Fallback IP
Specify the IP address the airFiber
AF-5 should use if a DHCP server is not found.
-
DHCP Fallback Netmask
Specify the netmask the
airFiber AF-5 should use if a DHCP server is not found.