21
Technical Specifications
Troubleshooting
My Device is not receiving power from the AC inverters or
12V supply
1. Ensure that the AC output or 12V section is activated. The
LED next to the activation button should be illuminated. Press
the power button if the LED is not illuminated.
2. Check the LCD for any fault indications on the display.
“HIGH OUTPUT” indicates that the device you are trying
to power requires more power than the Power Station will
deliver. This will be accompanied by audible beep. If the
device is in need of a recharge, like a laptop, try powering
down the laptop and recharging.
“SHORT CYCLE UNIT” indicates a short on the AC or DC
outputs. Unplug the devices on these connectors and power
cycle the unit to continue operation.
“LOW BATTERY” indicates the Power Station will need to be
recharged before it will power the device.
“BATTERY TEMP” indicates the unit has shut down while
the battery temp has exceeded the normal operating range.
Discontinue use of the Power Station to allow the battery to
return to a safe temperature range.
“HIGH UNIT TEMP” indicates the unit has shut down to
protect the battery from excessive temperature damage.
Turn the Power Station off for 30-60 minutes to allow the
temperature to cool to within its operating range.
My Device is not charging from the USB outputs
1. Ensure that the USB output section is activated. The LED
next to the USB power button should be illuminated. Press
the power button if the LED is not illuminated.
2. Ensure the USB plug is fully inserted into the jack and the
device.
