UBI EasyCoder 201 II E
UBI EasyPak 501 SA – Getting Started
5
230V
0
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
Voltage Switch
Power Switch
Power Cord
Receptacle
Serial Interface
Connector
230V
0
MADE IN SWEDEN
Type
Art. No.
Ser. No.
115/230 V 2.6/1.3 A 50–60 Hz
TA
CONNECT POWER CORD
❏
Turn the printer OFF!
❏
Make sure that the power switch on the upper back
of the printer is turned OFF (so that the 0 side of the
switch is pressed down).
❏
Connect the power cord into the power cord recepta-
cle on the back of the printer. Plug the other end of
the power cord into an AC power outlet.
(N.B. Check that the printer is set for correct volt-
age, 115 V or 230 V.)
CONNECT INTERFACE CABLES
❏
Before connecting an interface cable, please make
sure that both computer and printer are turned OFF.
❏
UBI LabelShop
— use
serial
interface cable
Connect the serial interface cable to the connector
on the back of the printer and fasten the cable with
the screws attached to the cable connector. Connect
the other end of the serial interface cable to the PC
in the same way.
❏
Turn the printer ON!
