UBI EasyCoder 501 Ticketing – User's Manual
7
PAPER LOAD, cont'd.
External Supply
The EasyCoder 501 Ticketing can use various types of external
supplies, e.g. stacks of fan-folded tickets or an external paper
roll. When the external paper intake is used for stacks placed
behind the printer, the top of the stack should not be higher than
the intake.
1
Turn the printhead lift knob to “Load” position.
2
Thread the paper through the external paper intake on the
printer's rear plate. The outer guide is adjustable to fit
different paper widths.
3
Thread the paper underneath the guide shaft and under the
guide plate of the label stop sensor.
4
Thread the paper past the print roller.
5
Adjust the green guide ring so the paper is guided with a
minimum of play.
6
Turn the printhead lift knob to “Print” position.
7
Feed out at least one ticket by pressing the < Feed > key.
Note!
When an external paper supply is used, take precautions to
protect the paper stock from sand, grit and other hard particle,
that may damage the printhead.