23
UBI EasyCoder 401 Linerless – Technical Manual
Print Window:
Printhead in left-hand position
Continued!
SETUP PARAMETERS, cont'd.
The printhead can be fitted in two positions (see chapter “Printhead
Replacement”). When the printhead is fitted in the innermost, left-
hand position (see illustration), dot No. 0 is aligned with the inner
edge of the paper web. Since the maximum print width is 104 mm
(4.1") and the maximum web width is 114 mm (4.49"), this leaves
a margin of at least 10 mm (0.39") along the outer edge of the web,
where no printing can be performed.
PAPER FEED
DIRECTION
Dot 0
Dot-line on
printhead
X-start
Width
Origo
Length
From
paper supply
Dot 831
10 mm
(0.39")
WINDOW
WINDOW
max. 114 mm (4.49")
104 mm (4.1")
