102
UBI EasyCoder 301 Direct Protocol – Programmer's Guide Ed. 1
Chapter 13 Commands and Functions
Chapter 13
Commands and Functions
Instruction
Chapter
Purpose
ALIGN (AN)
4.2
Specifies which part of a text, bar code field, image field, line
or box will be positioned at the insertion point.
BARFONT (BF)
4.4
Specifies a single-byte character set font for printing human
readable bar code interpretation. The settings are: start
parameter; font name; font size in points; character slant in
degrees, with positive values slanting the characters to the
right; vertical offset between the barcode and the interpretation;
width magnification; height magnification; enable/disable
the printing of barcode interpretations.
BARFONT (BF) ON/OFF
4.4
Enables/disables the printing of bar code interpretations.
BARFONTD (BFD)
9.2
Specifies a double-byte character set font for printing human
readable bar code interpretation. The settings are: font name;
font size in points; character slant in degrees.
BARFONTDSIZE (BFSD)
9.2
Specifies the font size of a double-byte character set in points
for printing human readable bar code interpretation.
BARFONTDSLANT (BFLD) 9.2
Specifies the slant of a double-byte character set font in
degrees for printing human readable bar code interpretation.
BARFONTSIZE (BFS)
9.2
Specifies the font size for a single-byte character set font in
points for printing human readable bar code interpretation.
BARFONTSLANT (BFL)
9.2
Specifies the slant of a single-byte character set font in
degrees for printing human readable bar code interpretation.
BARHEIGHT (BH)
4.4
Specifies the height of a bar code in dots.
BARMAG (BM)
4.4
Specifies the magnification with regard to the width of the
bars in a bar code.
BARRATIO (BR)
4.4
Specifies the width ratio between wide and narrow bars in a
bar code.
BARSET
4.4, 9.1
Specifies a bar code type and sets parameters for complex bar
codes
BARTYPE (BT)
4.4
Specifies the type of bar code.
BREAK
6.16
Specifies a break interrupt character separately for the parallel
and serial communication channels.
BREAK ON/OFF
6.16
Enables/disables break interrupt separately for the parallel
and serial communication channels.
CHR$ (n)
9.2
Returns the ASCII character whose number is given in the
brackets.
1. Commands
(Alphabetical)
