UBI EasyCoder 201 II E
UBI EasyPak 101 SA – Getting Started
5
Power Switch
Voltage Sign
Power Cord
Receptacle
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
230 VAC
50 Hz
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
230 VAC
50 Hz
Serial Interface Connectors
(RS232)
CONNECT POWER CORD
❏
Turn the printer OFF!
❏
Make sure that the power switch on the back of
the printer is turned OFF (so that the 0 side of the
switch is pressed down).
❏
Connect the power cord into the power cord recep-
tacle on the back of the printer. Plug the other end
of the power cord into an AC power outlet.
(N.B. Check that the printer is set for correct volt-
age, 115 V or 230 V.)
CONNECT INTERFACE CABLES
❏
Before connecting an interface cable, please make
sure that both computer and printer are turned OFF.
❏
UBI LabelShop — use serial interface cable
Connect the serial interface cable to the connector
on the back of the printer. Connect the other end of
the serial interface cable to the PC serial interface
in the same way.
❏
Turn the printer ON!