UBI Windows Driver – Installation Instructions
12
Error Message Appears in
Printer's Display, cont'd.
APPENDIX 2: ERROR CONDITIONS, cont'd.
MEMORY OVERFLOW
, cont'd.
• The number or size of the printer's RAM packages may be too
small. Add another pair of RAM packages or use RAM packages
with larger capacity. Refer to the Technical Description and to
your local UBI distributor.
FIELD OUT OF LABEL
This error may occur when the printer receives a print image larger
than the size of the labels. See “Unexpected Printout Appearance”,
paragraph 1 on previous page.
• Adjust the size of the document and print it again. It is not
necessary to clear the error message.
RIBBON LOADED
This error can only occur in printers equipped for thermal transfer
printing. The printer has been set up for direct thermal printing in
“Control Panel\Printers\Setup\Options\Paper Quality”, but is
loaded with transfer ribbon.
• Remove the transfer ribbon or change the setup to a transfer
ribbon (e.g. UBI GP 10/11 or UBI HP 20/21).
OUT OF PAPER
OUT OF RIBBON
The printer is out of paper or transfer ribbon.
• Load a new supply of paper or transfer ribbon. If another type of
paper or ribbon is used, the printer's setup must be changed in
“Control Panel\Printers\Setup\Options\Paper Quality”.
• In “Control Panel\Print Manager”, you can see if there are any
labels waiting to be printed.
ERROR IN PRINT SETUP
The UBI Windows Driver installed in your PC is a newer version
than the corresponding program installed in your printer.
• Update the printer by fitting a new set of Configuration EPROMs.
Consult your local UBI distributor.
