GET TO KNOW YOUR HEATER
G
B
TM
C
D
E
F
A
Product Features
A. Cool-Touch cabinet
E. Mode Button
B. Power Button
F. LED Temperature Display
C. Decrease temperature button
G. Standby ON/OFF button
D. Increase temperature button
OPERATING INSTRUCTIONS
1. Plug the power supply cord into a grounded wall outlet. (110/120VAC, 60Hz)
2.
TURNING THE HEATER ON:
To turn the heater ON, press the Power button
, the power LED will turn on.
Then press the MODE button
. The heat setting will be set to AUTO, Press the MODE button
again to
set to HIGH
. Press the MODE button
a third time to set to LOW
, Press the MODE button
a fourth time to set the heater OFF.
3.
TURNING THE HEATER to Standby OFF:
To turn the heater to Standby OFF, press Standby OFF button.
The heater will shut off but the fan will continue to run until all the heat has been expelled. The heater will turn
off automatically and is set to Standby mode. Press the Standby ON button to turn ON the heater again. If you
are not going to use the heater for a long time. Press Power button
to fully shut down the heater. The
power LED will turn off.
4.
SETTING THE THERMOSTAT
Press the MODE button
and set to AUTO mode to engage the automatic thermostat.
5.
SETTING THE TEMPERATURE
To set the desired temperature:
Press the button once until the numeric temperature starts flashing.
Press the button again to increase the temperature or the
button to decrease the temperature.
5
