-
During dehumidifying modes, remove the drain
plug from the back of the unit. You can also connect
For
models without a drain connector, just attach
the drain hose to the hole. Place the open end
of the hose directly over the drain area in your
basement floor. Please refer to Fig.19 & 20.
-
When the water level in the bottom tray reaches
a predetermined level,
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away (Fig.21). Reinstall the bottom
drain plug and restart the machine until the P1
symbol disappears. If the error repeats, call for
service.
"
"
the unit beeps 8 times and
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal).
"
"
Fig.19
Fig.20
Fig.21
INSTALLATION INSTRUCTIONS
Water drainage:
the 3/4''(1.9cm) garden hose (locally purchased by
consumer) onto the drain connector (5/8''(1.58cm)
universal female mender already on the unit).
12
R emove the
d rain plug
Continuo u s
drain hos e
D rain plug
Bottom dra in plug
