INSTALLATION INSTRUCTIONS
Installation in a sliding sash window
1. Cut the foam seal(adhesive type) to the proper length and
attach it to the window frame. See Fig.14.
2. Attach the window slider kit to the window stool. Adjust the
length of the window slider kit according to the width of
window, shorten the adjustable window kit if the width of
inches.
Open the window sash and place the window slider kit on
3. Cut the foam seal (adhesive type) to the proper length
and attach it on the top of the window. See Fig.16.
4. Close the sliding sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the
open gap between the top window sash and outer window
sash. See Fig.17.
Foam seal
Foam seal A
(adhesive type)
Fig.14
Fig.15
Fig.16
Fig.17
Window
panel
10
~
22.1
38???.?6
window is less than 22.1
the window sill. See Fig.15.
