Part
Description
Quantity
Image
BB
M6 Washer
56
FF
M6X15 Screw
48
II
M6X35 Bolt
8
JJ
Φ8*180mm Stake
16
GG
Ring
48
Hardware pack 3
Fig.9:
Attach slanted beam (K1) & middle beam (K2) to top connector (J) with bolts (AA) and washers (BB).
Fig.10:
Attach the lower side of slanted beam (K1) to slanted bar connector (G) with bolts (DD), washers (BB) and nuts (EE).
Fig.11
: Attach the lower side of middle beam (K2) to top bar connector (H) with screws (FF), washers (BB) and nuts (EE).
Fig.12
: Attach the lower side of top short beam 1 / top short beam 2 (L1/L2) to middle beam (K2) with screws (FF) and
washers (BB).
Fig.13:
Attach top short beam 1 / top short beam 2 (L1/L2) to slanted beam (K1) with screws (FF) and washers (BB); attach
top middle beam 1/ top middle beam 2 (M1/M2) to slanted beam (K1) & middle beam (K2) with screws (FF) and washers
(BB) as shown.
Fig.14:
Attach top long beam 1/ top long beam 2 (N1 /N2) to middle beam (K2) with screws (FF) and washers (BB).
Fig.15:
Attach top long beam 1/ top long beam 2 (N1 /N2) to slanted beam (K1) with screws (FF) and washers (BB).
Fig.16:
Place big top cover (O) onto top connector (J) and then screw hook (P) to big top cover (O); do not fully tighten bolts
at this stage.
