Fig.1:
Attach the long-side long screen(H1) into the long-side short screen (H2). Repeat this step for short-side screen (I1/I2).
Fig.2:
Attach the middle beam connector (H) to screens (I1/I2) tightly with bolt (AA) and washer (BB) and lock the two screens. Repeat this step
for long-side screens (H1/H2)
Fig.2-1:
Attach the long netting tube (L1) to the long-side screen, short netting tube (L2) to the short-side screen wiht bolt (AA) and washer (BB).
Fig.3:
Attach the vertical screen (J) tightly to the post (A) with bolt (DD) and washer (BB). Don’t tighten the bolts fully at this stage.
Part
Description
Quantity
Image
AA
M6*15 bolt
28
BB
Dia.16 x M6 flat washer
64
CC
M6*25 bolt
48
DD
M6*35 bolt
20
II
Dia.12 x M6 flat washer
32
Z
M6 wrench
1
Hardware Pack 1
Fig.4:
Attach the long and short screens (H2/I1) to post (A) tightly with bolt (CC) and washer (BB). Repeat this step for screens (H1/I2).
Don’t tighten the bolts fully at this stage.
Fig.5:
Attach the vertical screens (J) to the screens (H2/I2) by bolt (DD) and washer (BB). Now, go back and tighten all bolts.
Fig.6-1:
Attach the flower basket side panel (K3) to the flower basket panel (K1) and flower basket rear panel (K2) with bolt (CC) and
washer (II).
Fig.6-2:
Put the flower basket inner frame (K4) onto the flower basket.
