Parts & Hardware List:
Number
Description
Qty
A
Table top
1
B
Glass
1
C
Supporting frame
1
D
Leg
4
AA
M6×20 Bolt
16
BB
M6 Spring washer (preassembled 10PCS)
26
CC
M6 Flat washer (preassembled 10PCS)
18
DD
M6×35 Bolt
16
EE
M6×30 Bolt (preassembled)
10
FF
M6 Wrench
1
GG
Plastic pad (preassembled)
10
HH
Adjustable foot pad (preassembled onto D)
4
Step 1
: Place table top (A) upside down on a
non-abrasive surface. Attach each leg (D) onto table top
(A) with a bolt (DD), spring washer (BB) and flat washer
(CC), repeat for all 4 legs. Do not tighten at this step.
Step 2
: Attach supporting frame (C) onto leg (D)
with a bolt (AA), spring washer (BB) and flat
washer (CC). Tighten all bolts.
Step 3
: Turn table right side up. Place glass (B) into
tabletop frame (A). Your table is ready to be used.
Maintenance:
1. Before using, clean the table completely with a soft dry towel.
2. Do not leave your table in wet conditions where there is a risk of rust developing.
3. When your bistro set is not being used, wipe free of any dirt or loose objects, wash with a mild solution of soap
and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
4. When not used, store in a cool, dry location away from sunlight.
