8
INSTALL THE HOOD
Note: at least two people will be required to mount
the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood
with the wall-mounting bracket. Gently lower the hood
until it securely engages the bracket.
3.
Open the filter and find the two
φ
8 mm holes on the
back of the hood. Drill 2 holes in the wall, put drywall
anchors provided.
4.
Adjust the height of the flue to finalize the installation.
Then fix
the bracket of lower flue with two screws (4*8mm) between upper
and lower flue.
5.
Install the flues
onto the range hood, use the other two
screws (4*8mm) to attach the bottom of flue, then fix the
bracket of lower flue to the wall by 4*40MM screws.
6.
Slide up the upper flue as shown, use two screws(4*8mm)to attach the
upper flue to the bracket.
7.
After adjusting the position, open the filter and install the inner
panel in place with safety screws
(ST4 *30MM+washer).
2pcs
4*8mm
screws
2pcs
4*40mm
screws