Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry frame completely. Do not use bleach, acid,
or other solvents on the frame parts.
• Cushions may be washed on the surface only by using mild soap and water or commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry
• We recommend the use of furniture covers when not in use.
• Please inspect and tighten all bolts or fasteners on a regular basis to ensure proper performance and safety of
your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area
during off season periods.
STEP 2:
At the rear of the seat, fasten the seat assembly (#A2) to the back
assembly (#A1) by using bolts (#A5) and washers (#A8). Keep the
bolts loose. See Figure 2.
STEP 3:
Fasten both the left arm (#A3) and the right arm (#A4) to the seat
assembly (#A2) by using bolts (#A6) and washers (#A8). Keep the
bolts loose. See Figure 3.
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
#A6 BOLT M6*16
STEP 4:
Fasten both the left arm (#A3) and the right arm (#A4) to the back
assembly (#A1) by using bolts (#A7) and washers (#A8). Make sure
that all of the bolts have been tightened completely and then cover
them with bolt caps (#A9). See Figure 4.
STEP 5:
Place the cushions (#A11 and #A12) on to the chair. Secure the
cushions in place by using the velcro straps provided. See Figure 5.
A5
A7
A3
A4
A1
A8
A9
A8
A8
A6
A6
A8
A9
A9
A9
#A5 BOLT M6*65
65
16
PAGE 2 OF 2
A11
A12
A1
A2
A2
A3
A4
#A7 BOLT M6*35
35
