A
B
C
A
B
C
3
Tools required :
Philips Screwdriver(Not Included)
INSTALLATION INSTRUCTIONS
P
a
rt
s
L
is
t
Part 1:
Part 2:
Part 3:
Mantel & insert
4 Wheels
16pcs Screws
Fig 1
Fig 2
Fig 3
Fig 4
Step 1
:
Wheels
Assembly
1.Remove the mantel, insert,4 wheels and hardware pack with precaution from the box.
Turn the unit so it sits on its top. Attach the wheels onto the mantel bottom using the
screws(Fig 3) provided(See Fig 4)
Note
:
The
insert
has
been
mounted
into
mantel
before
shipment
A
s
s
e
m
b
ly
Step 2
:
Plugging
in
the
heater
Note 1.This heater is for use on 120 Volts.
2.A 15 Amp Circuit is required to operate this appliance. If the breaker trips
when the appliance is running, you may need to move the appliance to
another location or unplug other appliances that are on the same circuit.
OPERATING INSTRUCTIONS
Read all instructions and warnings prior to operating the
appliance. Ensure that all controls are in the OFF”position
before
plugging
the
appliance
into
an adequate electric
outlet.
“
Switches operation
Master Power Switch(A)
Supply power to all unit functions(Heat/Flame)
Low heat Setting(B)
Supplies power to heater fan and heater element when
the switch is in the I”position the heater operates on low
High Heating Setting(C)
Supplies power to heater fan and the heater element
when the switch is in the II”position the heater operates
on high. The button B” must
also
in
the I” position
for
the
high
heat
setting
to
operate
“
“
“
“
MAINTENANCE
WARNING:
Before
attempting
to
perform
any
maintenance
on
this
appliance
,
turn
all
controls
to
the OFF” position
and
unplug
.
Allow
the
appliance
to
be OFF” for
at
least 10 minutes
before
performing
any
maintenance
in order to allow all components to cool properly
REPLACING LIGHT BULBS:
1.Ensure that all controls are off, the appliance is unplugged
and bulbs are cool to the touch.
2.Wear latex gloves to ensure that grease/oil from your hands does
not transfer to the bulbs.
3.Remove back panel to access light bulbs(see Fig B)
4.Remove the burnt out light bulb and replace with a new bulb.
Hand-tighten the bulbs only,do not over tighten.
5.Replace back panel and screws(see Fig B)
“
“
Fig B
Fig A
Access Panel
Screws
Light
Bulbs
QTY
N0. HARDWARE
A
B
4PCS
16PCS
Note
Light bulbs may become loose during shipping.If the flame effect is
dim or does not operate properly at first, ensure that the light bulbs
are properly secured in the sockets (bulbs should be finger tight, do
not over tighten),See Replacing Light Bulb Section of the manual for
When you first turn the heater on, it may emit a slight but harmless
odor
from certain oils or greases being heated as the appliance
resulting
is used for the first time. This odor is perfectly safe and will stop
shortly. It will not reoccur after the first operation of this appliance.
This appliance comes equipped with an overheat protection safety
device. Should the appliance begin to overheat for any reason, it will
automatically turn all heater functions of the appliance off. The
appliance will have to be reset
prior
to
continuing
use. To
reset
the
overheat
protection
safety
device, turn
all
controls
off
and
unplug
the
appliance, wait 10 minutes, plug
the
appliance
back
in
and
turn
on. If
the
appliance
continuously
overheats, please
call
our
customer
service
department
toll
free
at 1-866-206-0888.
CLEANING:
1.To remove dust from glass window, use a clean dry cloth.
2.To remove fingerprints or other marks from glass window, use a
clean damp cloth. Do not spray glass cleaner or other liquids
directly onto the window.
3.Clean metal surfaces with a clean damp cloth making sure not
to push dust or debris into any air intake or exhaust vents.
4.Do not use abrasive cleaners or spray liquids on any part of
the appliance.
5.Periodic cleaning/vacuuming of the fan/heater unit is
strongly recommended to ensure that no dirt or foreign
objects build up.
WARNING:
Do not exceed the
recommended
bulb
wattage. Use
only 120V, 40W,E12
Chandelier
Light Bulb, Candelabra
Base. The
lamp holder is model E12.
Hint:
It is a good idea to
replace all light bulbs at one
time if they are close to the end
of their life.Group replacement
will reduce the number of times you
need to open the unit to replace
light bulbs.
instructions.
