Step 2:
Fasten the supports (#3) and the plastic holders on the
table top (#1) by using screws (#5). See Figure 2.
Step 3:
Fasten the center connector with ring (#4) to the middle
of the legs (#2) and supports (#3) by using bolts (#6)
and washers (#7). Make sure that all bolts are
tightened completely, and then cover them with bolt
caps (#8). See Figure 3.
Step 4:
Turn the table to its upright position. See Figure 4.
NOTE:
To use an umbrella with this table, please remove the
plastic center plug and put the umbrella pole through
the table top (#1) and center connector with ring (#4).
Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse
thoroughly, and dry frame completely. Do not use
bleach, acid, or other solvents on the frame parts.
• Wash glass with mild soap and water, rinse
thoroughly, and dry glass completely.
• Please inspect and tighten all bolts and fasteners on
a regular basis to ensure proper performance and
safety of your table.
• When moving the table, remove the umbrella. Do
not drag.
• We recommend the use of furniture covers when not
in use.
• In order to prolong the life and beauty of your table,
we recommend it be stored in a dry and protected
area during off season periods.
• Tempered glass has been used for increased strength and safety of your table. However, during
windy conditions the umbrella should be lowered and/or removed.
FIGURE 2
FIGURE 3
FIGURE 4
PAGE 2 OF 2
6
7
8
3
