3
INSTALLATION INSTRUCTIONS
Step 1: Drill 7 holes onto the
from ground and 2 holes
from the ground
Figure 1 . Then
(#3) onto the predrilled holes,
finally use the 5 screws(#4) to fix the
(#1) onto the wall
Figure 2.
wall: 5 holes evenly spaced, 1035 mm
evenly spaced,
584 mm
as shown in
insert 5 plastic anchors
wall bracket
as shown in
Step 2:
the front glass,then use 2
(#5 ) to fix the bracket(#2) at the bottom of insert
Figure 3 .Then hang the insert onto the
(#1) and use 2 screws (#4) to fasten the bracket(#2) on the
wall
Figure 4 .
Remove
screws
as shown in
wall bracket
as shown in
Step 3:
the pebbles(#6) on the front of PP plastic board
Figure 5 .Then assemble the front glass by
locking the left
plate(#7) and right
plate(#8)
Figure 6. Then remove the protective
covering on glass surface.
Place
as shown in
hanging
hanging
as shown in
wall bracket
bracket
plastic anchors
screws ST4.2*40
screws ST3.5*8
pebbles
left
plate
hanging
right
plate
hanging
1pc
#1
#1
1pc
#2
#2
7pcs
#3
#3
7pcs
#4
#4
#4
wall
wall
front glass
2pcs
#5
1bag
#6
#6
1pc
#7
1pc
#8
#8
#2
#5
Figure 1
Figure 3
Figure 5
Figure 2
Figure 4
Figure 6
Note:left hanging plate and right hanging plate have been installed on the front glass before shipment.
Tools required :
Philips Screwdriver(Not Included)
