Ubee Interactive
Using the Pass Through Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
59
4. Click
Apply
. The port trigger rule is created and displayed in the table. Field
descriptions are listed below the screen example.
Note
The following example shows the Port Triggering option set up for a dual Xbox
configuration.
6.7
Using the Pass Through Option
Use the
Pass Through
option to configure a pass through table. Devices in the pass
through table are treated as bridge devices, storing and forwarding data between LAN
interconnections.
Label
Description
Trigger Start Port
Defines a port number or the starting port number in a range
of port numbers.
Trigger End Port
Defines a port number or the ending port number in a range of
port numbers.
Target Start Port
Defines a port number or the starting port number in a range
of port numbers.
Target End Port
Defines a port number or the ending port number in a range of
port numbers.
Protocol
Defines the protocol type for this rule, UDP, TCP, or Both.
Description
Names the triggering rule.
Enabled
Enables (on) or disables (off) the triggering rule.
Remove All
Deletes all port triggering rules.
Edit
Allows you to edit a port triggering rule.
Remove
Deleted a port triggering rule.
