3
Figure 2: Screw Size
•
Place the device near an outlet so the AC power
adapter can be plugged in directly to the wall
outlet without an extension. Observe the
maximum load of the electrical outlet. Please only
use the power adapter provided with the unit.
To install the device:
Connect the device according to the installation
instructions in Figure 3.
1. Connect one end of the RF coaxial cable (not
included) to the RF port on the device. Connect
the other end to the cable wall outlet or a cable
splitter. (Use a cable splitter, not included, to
connect the device and a television to the same
cable wall outlet.) Be sure not to bend or over
tighten the cables as this may strain the
connector and cause damage.
Figure 3: Connection Diagram
2. Connect one end of the Ethernet cable (included)
to one of the Ethernet ports (ETH1 – ETH4) on
the device. Connect the other end to the Ethernet
port on a PC.
Note:
Use Category 5e or 6 cables
with RJ45 connectors when connecting Ethernet
devices to the LAN ports. This ensures Gigabit
Ethernet speeds when the computer supports it.
3. Connect one end of an RJ11 phone cable to the
telephone port (TEL1, TEL2) on the device that
has been provisioned for voice service as
specified by the service provider. Connect the
other end to the phone port of the telephone.
Note:
Telephone service will not be available if
voice service has not been provisioned through
the service provider.
