Ubee Interactive
Using the Wireless Radio Option
Ubee DDW36C Advanced Wireless Gateway MSO Operations Guide • October 2015
76
9.2.1
Scanning for Wireless Access Points (APs)
You can search for nearby wireless access points and display the results in a new
window.
Steps
To search for wireless access points:
1. Click
Scan Wireless APs
at the bottom of the Wireless Radio screen. Results are
displayed in a new window.
2. Click
Refresh
to update the results.
Wireless Channel
Set to Auto by default, the Wireless Channel selects a specific
channel to deploy the wireless network. This allows you to set
the operating frequency/channel depending on your particular
region. Channel selection can have an impact on wireless
networking performance. For more information, refer to
Selecting a Wireless Channel on page 91
.
The current channel is displayed as well as the interference
level.
Apply
Saves all screen changes when clicked.
Restore Wireless Defaults
Restores the factory default settings for wireless
configurations when clicked.
Scan Wireless APs
Scans for other wireless access points and displays channel,
encryption, SSID, RSSI levels, and other information. See the
section below for more information.
Label
Description
