Ubee Interactive
Using the Diagnostics Option
Ubee DDW365 Wireless Cable Modem Subscriber User Guide • October 2013
22
Steps
To test connectivity between devices:
1. Click
Status
from main menu.
1. Click
Diagnostics
from the left side menu.
2. Choose
Ping
from the Utility drop-down menu.
3. Enter new parameter values or accept the default values.
4. Click
Start Test
. Field descriptions are listed below the screen example.
Label
Description
Utility
Provides a drop-down menu to choose Ping or Traceroute.
Ping Test Parameters
Target
Defines the IP address to which you want to send a ping.
Ping Size
Defines the packet size (bytes of data) to send for the ping
operation. Default is 64.
No. of Pings
Defines the number of ping commands to send to the ping
target. Default is 3 pings.
