11 Electrical connections
accessories
11.1 Connecting position switch
A multiple switch must be connected to the modular connector type X14. This modular connector X14 is
accessible from the rear of the control. With an appliance with Plus pcb the cover first has to be removed in order
to gain access to this modular connector (
®
). Depending on the type of multiple switch that is connected, one
can use either an RJ11 or RJ12 plug.
It is best to use a 4-way switch with filter indication; always install an RJ12 connector in combination with a 6-
core modular cable.
When using a 3-way switch without filter indication always install an RJ11 connector in combination with a 4-
core modular cable.
Ubiflux Vigor W325 615743-G
Ubbink / 37
