![background image](http://html1.mh-extra.com/html/ubbink/uwa-2e/uwa-2e_installation-regulations_3133494014.webp)
5.3 Connecting the condensate discharge
The condensate discharge line for the Ubiflux Vigor appliance is located in the lower panel. The condensate is
discharged through the drainpipe. The siphon (with built-in aerator) is supplied separately with the appliance and
must be fitted by the installer below the appliance (bayonet connection). The siphon has an external connection
diameter of 32 mm. The siphon is connected to the inner sewer system. It is recommended to fit an odor trap
between the sewer system and siphon in order to avoid unpleasant odors.
Important
Never switch the two condensate discharge connections below the appliance!
It is recommended to use a 32 mm connection with gasket (HT DN32) (not supplied with the appliance) so that
the siphon can be cleaned easily in the future.
Important:
During assembly always apply a lubricant, such as acid-free vaseline, to the rubber sealing ring in the
gasket. This gasket connection has to be disconnected when servicing the appliance! The siphon must
not be glued to the condensate discharge line.
The condensate discharge can be connected, for example, with a straight or angled connection with gasket. Slide
the condensate discharge connection with gasket with sufficient length across the connection of the siphon.
A = Ubiflux Vigor W325 right-
hand version
B = Fitting siphon below in
Ubiflux Vigor appliance
C = Examples with condensate
discharge connections with
gasket HT DN32
D = Detachable connection
E = Example of odor trap
Ubiflux Vigor W325 615743-G