7. Now remove the fan from the unit; disconnect both fan cables.
8. Repeat steps 6 & 7 for the other fan in the appliance.
9. Carefully clean both fans with a soft brush; do not use any water or cleaning agent.
10. Clean the internal preheater.
11. Place both fans back in the appliance and connect the disconnected fan cables once
more; when doing so, take care that the fan cables are “behind” the fans and that the fans
are returned to their original position. The left fan is indicated by "Left"; the right fans is
indicted by "Right".
Comment: Do not change the position of the fans!!
12. Slide the cleaned heat exchanger carefully back into the appliance; when doing so, take
care that the EPS parts and rails in the appliance are not damaged, which could otherwise
leads to internal leaks in the appliance. Take care when returning the heat exchanger that
the text on the type plate is not upside down!
Place the heat exchanger back such that this type plate is visible.
13. Put the front cover back on and screw it secure.
14. Install two new fi lters and close the front cover.
15. Reconnect the 230V power supply to the appliance.
16. Reset the timer of the fi lter message by setting the timer back to zero in the settings menu
at step number 4.3.
17. After resetting the timer of the fi lter message the appliance returns to the main menu and
the appliance is once again ready for use.
10 Electrical diagram
34 | Art.-nr.:
616711-A
Ubifl ux Vigor W225 | 35
