8
B
Brace rail position
Fig. 02
Insert the
Locking Cam
nut.
Use screwdriver to turn Locking
Cam nuts clockwise until tight.
6.1
6.2
6.3
Insert the
connecting pins
to the rails.
3.1
3.2
3.3
Make sure
connector pin
passes through
the Locking
Cam.
2 x Support Pin
2 x 55mm bolt
Step 1
Select RHS brace. Align corresponding holes at each end and install RHS brace
rail onto end panel.
Step 2
Insert locking cams (2) and tighten them securely with screwdriver. (See
Fig.02
)
Step 3
Insert 55mm bolts (1) on the bottom of right lower rail, use Allen Key I to turn
clockwise until tight. (See
Fig.01
)
Step 4
Repeat Step 1-4 to install LHS brace rail.
Step 5
Insert support pins (2) at the shorter end per diagram. (See
Fig.01
)
