49
After starting the engine, its system will automatically set the fast
idle speed to warm up the engine, and will gradually reduce it to the
minimum as the engine warms up.
If the engine does not start after the third attempt, stop the starting,
detect and remove a malfunction.
Cold starting at temperature below -20°С
In order to ease the cold engine start at low temperatures, a preliminary
warm up is required (by steam, hot air, etc.).
Further operations are the same as in case of starting from cold at
-20°С and above.
Hot Engine Start
The sequence of operations is the same as in case of starting from
cold at -20°С and above.
If the engine does not start after the third attempt, press the throttle
pedal as far as it can go and turn on the starter for 2-3 seconds. The
control unit will perform "Scavenging of the Engine Cylinders Mode"
function and then retry to start the engine.
EnGInE STOP
In order to stop the engine, turn the ignition key to position "0".
Before shutting down the engine, let it run for 1-2 minutes at low rpm.
Chapter 7. VEHIClE DrIVING IN DIffErENT rOAD,
WEATHEr AND ClImATIC CONDITIONS
The manufacturer (UAZ PJsC) cares about its customers and
hopes for thoughtful use of its products.
While supporting the all-Russian program of road transport accident
reduction, the Manufacturer recommends that the maximum speed of
90
km/h
r provided in the Traffic Rules for Public Roads not be exceeded.
remember that a vehicle's control, stability and braking
performance depend greatly on tires/traction, therefore select a
driving speed according to traffic flow, weather and road conditions,
pavement condition, and vehicle and cargo features. In any case, the
driving speed must ensure the driver's continuous control over the
vehicle to observe safety requirements and Traffic rules.
The vehicle operation and service life depend greatly on driving
techniques. Driving correctly, you will ensure the motor vehicle motion
