uAvionix tailBeaconX, Getting Started Manual

Page: 8 / 13

UAV-1006666-001 8
Rev A
set the transponder mode to
“STBY” as shown by label “C” in the diagram
below.
Anytime the tailBeaconX is taken out of “STBY” on the AV-30-C,
Wi-Fi will be disabled!
6.1.3 skyBeacon Smartphone Application
Download the “uAvionix skyBeacon Installer” app from the iOS App Store
or Google Play Store. Note: DO NOT use the “uAvionix Ping
®
Installer” or
“uAvionix Echo Installer” apps. The app will guide you through the
configuration process.
6.2 tailBeaconX Ground Test Mode - Airborne Override
A . Configured Callsign / Flight ID
B . Current Squawk Code .
C . Mode Selection (STBY, ON, ALT) .
D . GPS NIC (integrity metric) .
E . GPS NACp (accuracy metric) .
F .
Pressure Altitude - Green indicates radar
interrogation and will change to IDT if IDENT
is active
.
G . Transponder status .
!