UAV-1004270-001
15
Rev A
6 System Specifications
6.1 System Functionality
tailBeaconX is a complete Mode S Extended Squitter (ES) ADS-B OUT
transponder, integrated with an internal SBAS/WAAS GPS and all
necessary antennas into an LED rear position light. tailBeaconX is
designed to meet the transponder and ADS-B requirements for operating in
controlled airspace worldwide, while minimizing installation costs.
6.2 Aireon Compatibility
tailBeaconX has been demonstrated to be Aireon-compatible. It has been
specifically designed to meet the performance requirements of Air
Navigation Service Providers (ANSPs) leveraging the Aireon space-based
ADS-B global air traffic surveillance system. This compatibility is not
reflected in authorized TSO functions and is not recognized by the FAA
TSO authorization, but is instead a performance-based designation
awarded by Aireon.
6.3 Wi-Fi
Wi-Fi is intended for on-ground configuration.
Wi-Fi is only enabled in
standby (STBY) mode
and disabled when in ALT or ON mode.
To restore Wi-Fi functionality after flight, the device must be set back to
STBY mode.
6.4 Call Sign
Your call sign may be adjusted on the ground using the skyBeacon Installer
app, or at any time by use of an appropriately featured control head. This
allows your call sign to be configured to correspond with ATC
communications and flight plans, for use during commercial, medical, or
volunteer flight operations. When changing the call sign using skyBeacon
Installer, ensure no other installation parameters are adjusted. For typical
operations, the call sign should be set to the entire aircraft registration text.
For example, U.S. registered aircraft must include the leading “N”.
