UAV-1002185-001
29
Rev D
3. tailBeacon may be grounded to the aircraft structure via the mounting
screws. However, it is recommended to connect the black wire to the
battery ground.
NOTE: THE UNIT SHOULD NOT REQUIRE MUCH FORCE TO
ROTATE; IF YOU FEEL RESISTANCE WHEN ATTEMPTING TO
ROTATE, STOP AND CONTACT SUPPORT. DO NOT INSTALL OR
START THE ANTI-ROTATION SCREWS UNTIL AFTER THE UNIT
IS INSTALLED AND ROTATED INTO POSITION.
4. Insert tailBeacon into the Mounting Plate and twist clockwise to the
vertical position, ensuring that the tailBeacon is oriented with the fin
facing directly downward.
5. Secure the tailBeacon to the Mounting Plate using the two supplied
M2 anti-rotation screws and a 1.5mm hex driver.
To ensure performance of the integrated altitude encoder, the wire
bundle exiting the tailBeacon enclosure must not be sealed. This area
functions as the static pressure sensing port.
!
