UAV-1002513-001
14
Rev A
Altitude
encoder
testing, for
VFR
operations
Ensure a recent “Last
Calibration” Date
See
tailBeacon
TSO User
and
Installation
Guide
Section
10.4
12 Calendar
Months
Altitude
encoder
testing, for
IFR
operations in
controlled
airspace
Altitude encoder tested
and found to comply
with Part 43 Appendix E
Section (c)
In accordance
with 14 CFR
Part 91.411
and Part 43
Appendix E
Section (c)
8.4 Visual Inspection
Perform a visual inspection as detailed in this section. Check tailBeacon
system components for damage or other defects and replace as required.
Inspection may require the temporary removal of a unit to gain access to
connectors. Follow guidance in User and Installation Guide for equipment
removal and replacement. Refer to model specific Aircraft Maintenance
Manual for instructions on removing access panels or covers, as required.
8.4.1 tailBeacon Visual Inspection
•
Inspect the tailBeacon unit and verify it is securely mounted.
•
Inspect the unit fasteners and verify they are properly torqued and
show no wear or damage. Additionally
–
o
Verify unit support structure is in good condition and its integrity
is not compromised.
o
Inspect for corrosion and treat as required.
•
Inspect the condition of the wiring.
o
Verify that all wiring and cables are securely fastened.
o
Verify that the harness shows no signs of cracking, chafing,
abrasion, melting, or any other form of damage.
o
Inspect the tailBeacon connectors for corrosion, evidence of
moisture, or other defects.
