UAV-1002156-001
ECCN 7A994
Page
18 | 37
REV I
8.2 Connections
1. Connect a USB-C cable to the USB-C port in order to provide direct
power or to charge the battery. While the device is charging, a blue
BAT LED will remain lit. When the device has completed charging
the blue LED will extinguish.
2. Care should be taken to make sure all devices are secure and will not
interfere with pilot visibility, mobility, or aircraft operation.
8.3 Installation Setup
Configuration of the SkyEcho is accomplished by logging on to the device
directly from a computer or mobile device using the SkyEcho internal Wi-Fi
hotspot. No additional application is necessary.
