3
The latest APM firmware must be installed onto the Pixhawk
autopilot before using the Ping Receiver. To load firmware onto
Pixhawk, install a mision planner on your GSC. Mission planner
applications are available for free download from
ardupilot.
com
install
•
After selecting correct file, read the safety information and
select Download.
•
Select Initial Setup, Install Firmware and select your vehicle.
•
When prompted, follow the directions to load the
firmware. Once the status bar shows that the download is
complete, power cycle the Pixhawk by disconnecting and
reconnecting the USB cable.
load firmware
Download Mission Planner (Windows)
Ardupilot.com > Download > Mission Planner
Download APM Planner (OS X and Linux)
Ardupilot.com > Download > APM Planner 2.0
