Configure
3
Selected Device Type:
Choose
ping200s/20s.
Control:
Select transmit a transmit type.
Standby:
Transponder will not respond to
interrogation.
ON:
Replies to interrogation with 4 digit
squawk code.
ALT:
Replies to interrogation with altitude
information.
1090ES:
ADS-B transmit is always enabled
when a 6 digit ICAO code is entered.
ICAO:
Enter your ICAO Number in Hexadecimal
format. If your identifier is in octal (eight digits)
format you must convert it prior to entry.
Call Sign:
Enter the tail number of the aircraft.
(A-Z 0-9)
Emitter:
This should be set to your aircraft type.
UAV is the selection for unmanned vehicles.
VFR Code:
Enter the default VFR code for your
country. The United States code is 1200.
Maximum aircraft speed:
Select your aircraft
maximum speed.
ADS-B In Capability:
Select aircraft ADS-B receive
capability. If you do not have a separate ADS-B
receiver this should be set to None.
Aircraft Length/Width:
Select the length/width
value in meters that matches your aircraft.
GPS Offsets:
GPS location relative to the roll axis
and nose of the aircraft.
COM1 Rate:
Sets the serial port communication
rate. This is only necessary for serial control of the
transponder.
L
aunch the
uAvionix Ping
application and tap
Configuration.
Complete
all fields as appropriate for your aircraft.
