UAV-1004233-001, AV-30-E Pilot’s Guide
15
Revision A
Operation in both AI and DG modes share common user interface
controls as follows:
Rotary Knob with
Momentary Push
Left Push Button
Right Push Button
(HoldFor
Brightness Adjust)
Photo Cell
(Auto Screen
Brightness)
TFT Color Display
Figure 5 - Common User Interface Components
Press and hold the center knob to switch between AI and DG mode
when Function Lock is disabled. See section 13 Install Menu
Activation.
6.2 AI Mode Display Components
The following section describes the user interface operations when
operating as an AI.
6.2.1 AI Mode – Basic Components
The following figure shows the basic AI with all customizable data
overlay fields turned off.
The data shown cannot be disabled or customized:
