UAV-1003947-001, AV-30-C, Installation Manual
47
Rev E
3.
Monitor an unused frequency and verify there are no unintended squelch breaks or
other tones that would interfere with communications.
VHF NAV RADIOS
Verify VHF NAV operates without interference from the AV-30-C.
1.
Power on the VHF NAV radio.
2.
Monitor a local, remote, and unused frequency.
3.
Verify there are no misleading navigation indications during the monitoring of each
frequency.
4.
Verify audible station ID and that the station is clear of audio interference that would
prevent identification.
ADDITIONAL AVIONICS
Additional Avionics should be tested according to the manufacturer
EMC/EMI test procedures. This testing assumes the existing equipment is
functional and operating correctly at time of testing. The following
summarizes a typical EMC test.
1.
Operate the AV-30-C.
2.
Operate the existing installed avionics according to manufacturer instructions. If
capable, utilize the device transmit and receive functions through a range of values.
3.
Verify no errors, warnings, or unexpected operation is observed on the AV-30-C
during operation of the installed avionics.
4.
Verify no errors, warnings, or unexpected operation is observed on the installed
avionics during operation of the AV-30-C.
