UAS Smokeeter SE 24, Owner'S Manual

Page: 8 / 24

4
Raise the unit into position, guiding through the ceiling
opening.
Attach threaded rod, hanging wire or chain to the unit
and secure in approximate position.
Install four corner locating plates. Attach with #8 screws.
Check alignment and gaps. Each end should be the
same distance to the T-bar. The hinge side should align
flush with the T-bar and be about
1 ⁄
16
" to 1 ⁄
8
" above the
T-bar. For best results, this gap should be constant along
the T-bar.