background image

ii

SAFETY PRECAUTIONS

We have provided many important safety messages in this manual and on the MCB unit. Always read and obey all safety 

messages.

•  Use two or more people to move and install the 

 

MCB system.

• The air cleaner must be properly grounded.
• Disconnect power before servicing.
• Replace all access panels before operating.
•  Wear protective clothing and safety glasses when handling 

collection components or servicing the air cleaner.

•  Electrical connections should only be made by qualified 

 

personnel, and be in accordance with local and national 

codes and regulations.

• Do not use in explosive atmospheres.

• Use nonflammable cleaners.
• Do not collect emissions which are explosive.
•  Keep flammable materials and vapors, such as gasoline, 

away from air cleaner.

•  The unit should be inspected frequently and dirt removed 

to prevent excessive accumulation which may result in 

flash-over or fire damage.

•  The MCB system should not be used for 

 

support of personnel or material.

• Operate only in safe and serviceable condition.

!

 

 

!

   

D A N G E R

!

 

WARNING

!

 

 C A U T I O N

C A U T I O N

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.  All safety messages will follow the 

safety alert symbol and the word “DANGER”, “WARNING”, or “CAUTION”. These words mean:

Indicates a hazardous situation which, if not avoided, will result in death or 

serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result 

in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result 

in minor or moderate injury.

CAUTION used without the safety alert symbol indicates a potentially 

hazardous situation which, if not avoided, may result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of fire, electric shock, or injury when using the air cleaner, follow these basic precautions:

!

 

WARNING

Summary of Contents for CLARCOR MCB Series

























Reviews: