S Y S T E M O P E R A T I O N
•
Confirm that the System has power. RED LED on front control panel will
indicate OFF.
•
PRESS the Main Panel Power Button (RED) or Remote Control Power
Button (RED). System will go directly to FM band and begin to scan.
Tuner will automatically stop on an active FM Channel. Manual tuning is
accomplished by pressing the RADIO + or—Button on the Front Panel
or Remote Control
•
PRESS the desired SOURCE BUTTON on the front Panel or Remote
Control. ie — AM/FM/CD.
SYSTEM BUTTON CONTROLS
•
MUTE—Press this button and the Audio Source playing will go Silent.
•
RADIO + or —, Changes Fre = UP and — = DOWN
•
or —, Changes Volume levels UP or DOWN
•
BASS + or —, changes BASS levels UP or DOWN
•
or — changes TREBLE levels UP or DOWN
•
SCAN allows AM or FM Tuner to begin scanning UP the Band in search
of the next Strong Audio Station.
•
FM-AM-CD allows the user to switch between FM, AM or CD (AUX)
T R O U B L E S H O O T I N G
No Sound
1. Check Power Supply Connections
2. Check the LED Display on front panel of Main Rock. It should read
“OFF”
3. Is the System in “MUTE” mode? Press the Mute button.
4. Check the Volume Level, you may need to increase the Volume Level.
When using an Auxiliary Device, make sure that the device’s volume
level it set at HIGH.
